TelePath® PCMCIA Fax/Modem with x2 Technology™ (with XJACK® connector)

http://www.gateway2000.com/product/specs/2491.htm (Amiga Plus Extra No. 5/97, 05/1997)

TELEPATH PCMCIA FAX/ MODEM WITH x2 TECHNOLOGY

FEATURES
Specifications are subject to change without notice or obligation.

Configuration Type II PC Card

Interface PCMCIA 2.1 and Windows 95 Plug and Play compliant

Fax modes Supports Group 3 send/receive facsimile using fax service class 1 (EIA/TIA 578) and Class 2.0 (EIA/TIA-592) commands; supports V.17, V.29, V.27ter, and V.21 channel 2 modulations Schemes

Data modes Asynchronous, Full Duplex, Automatic and manual call answer and originate. Supports x2 technology; ITU V.34 Annex 12; V.34, V.FC, V.32bis, V.32, V.22bis, V.22, V.23, V.21; Bell 103 and 212A standards

Speeds x2 Technology speeds (receive only, FCC limited) with fallback to V.34, data mode speeds from 300 to 33,600bps**; data compression increases effective throughout (depending on the file structure); fax speeds from 300 to 14,400bps

Error correction V.42/LAP-M (preferred) and MNP2-4 (fallback) for error-free operation over noisy telephone lines; modem also operates without error correction

Automatic negotiation Automatically negotiates with remote modem, adjusting speed, error control & data compression

Compatibility Communicates with: x2 capable modems and virtually all asynchronous modems that adhere to the ITU-T or Bell Standards. Modems (such as the US Robotics HST) that use other proprietary protocols aren’t compatible at speeds greater than 2400bps

Features Digital Line Guard, TI Chipset based DSP, Flash upgradable firmware

Power Consumption On-line: 350mA
Sleep: 35mA

Command Set Enhanced AT command set

Operating Systems DOS 5.x and above, Windows 3.x, Windows 95, and Windows NT 4.0 Workstation

Telephone Lines Operates over dial-up lines, tone or pulse dialing

Onboard diagnostics Digital loop back is supported

Connectors One RJ-11C modular phone jack

Ringer equivalence 0.5B

Certification FCC Part 15 and Part 68 (Unites States), Industry Canada Approval (Canada), US 1950 Listed (United States), CSA 950 Listed (Canada)

^**Maximum data transfer rate dependent on certain variables including particular modems with which you are communicating, telephone lines, communications software, and communications protocols.

Many Gateway 2000 products are custom engineered to Gateway 2000 specifications, which may vary from the retail versions of the software and/or hardware in functionality, performance or compatibility. Please ask your sales rep to explain any differences. The information in this document has been carefully checked and is believed to be accurate. However, Gateway 2000 assumes no responsibility for any inaccuracies that may be contained in this document. In no event will Gateway 2000 be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission, even if advised of the possibility of such damages.

FEATURES Specifications are subject to change without notice or obligation.
Configuration	Type II PC Card
Interface	PCMCIA 2.1 and Windows 95 Plug and Play compliant
Fax modes	Supports Group 3 send/receive facsimile using fax service class 1 (EIA/TIA 578) and Class 2.0 (EIA/TIA-592) commands; supports V.17, V.29, V.27ter, and V.21 channel 2 modulations Schemes
Data modes	Asynchronous, Full Duplex, Automatic and manual call answer and originate. Supports x2 technology; ITU V.34 Annex 12; V.34, V.FC, V.32bis, V.32, V.22bis, V.22, V.23, V.21; Bell 103 and 212A standards
Speeds	x2 Technology speeds (receive only, FCC limited) with fallback to V.34, data mode speeds from 300 to 33,600bps**; data compression increases effective throughout (depending on the file structure); fax speeds from 300 to 14,400bps
Error correction	V.42/LAP-M (preferred) and MNP2-4 (fallback) for error-free operation over noisy telephone lines; modem also operates without error correction
Automatic negotiation	Automatically negotiates with remote modem, adjusting speed, error control & data compression
Compatibility	Communicates with: x2 capable modems and virtually all asynchronous modems that adhere to the ITU-T or Bell Standards. Modems (such as the US Robotics HST) that use other proprietary protocols aren’t compatible at speeds greater than 2400bps
Features	Digital Line Guard, TI Chipset based DSP, Flash upgradable firmware
Power Consumption	On-line: 350mA Sleep: 35mA
Command Set	Enhanced AT command set
Operating Systems	DOS 5.x and above, Windows 3.x, Windows 95, and Windows NT 4.0 Workstation
Telephone Lines	Operates over dial-up lines, tone or pulse dialing
Onboard diagnostics	Digital loop back is supported
Connectors	One RJ-11C modular phone jack
Ringer equivalence	0.5B
Certification	FCC Part 15 and Part 68 (Unites States), Industry Canada Approval (Canada), US 1950 Listed (United States), CSA 950 Listed (Canada)
^**Maximum data transfer rate dependent on certain variables including particular modems with which you are communicating, telephone lines, communications software, and communications protocols.
Many Gateway 2000 products are custom engineered to Gateway 2000 specifications, which may vary from the retail versions of the software and/or hardware in functionality, performance or compatibility. Please ask your sales rep to explain any differences. The information in this document has been carefully checked and is believed to be accurate. However, Gateway 2000 assumes no responsibility for any inaccuracies that may be contained in this document. In no event will Gateway 2000 be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission, even if advised of the possibility of such damages.