Install Fails at Disk 9, "Error Creating LightWave"

Product: Video Toaster 3.0 4000

Platforms: 4000 4000T

Problem: When installing the Video Toaster 3.0 set, the install fails at disk 9, and gives the error message "Error Creating LightWave"

This occurs if the user is installing to an IDE drive which has an improper MaxTransfer setting. The solution is to correct the setting.

See: Setting MaxTransfer

Note: There are some IDE controllers for other Amiga models; the only situation this is known to occur in is with an IDE drive. If you have an Amiga 2000 or 3000 equipped with an IDE drive controller, and this error occurs, you will need to consult the manual for your controller for information on how to set MaxTransfer using the drive utilities for your controller.