Pro Audio Spectrum 16

The Pro Audio Spectrum 16 includes an option for Sound Blaster emulation. This emulation is not
supported by Windows NT. When installing the Pro Audio Spectrum 16, do not use the same interrupt
value as that option. Using the same interrupt may cause unpredictable system behavior.

On earlier cards the default for this interrupt is 5 and can be jumpered to be 2, 3, 5, or 7. 
On later cards without jumpers the default is usually 7. Please check the documentation for the
card before installing it under Windows NT.


If you do not use the Sound Blaster emulation under MS-DOS or Windows 3.1 you should disable it.
For more information, see "Changing I/O Address for Sound Blaster Compatibility" in Appendix A 
of the Pro Audio Spectrum 16 User Guide.

To install and configure the Pro Audio Spectrum 16, follow the steps above for installing the 
Sound Blaster.

Zurück zur Übersicht