ADAK-200/400/600 TAADAK-200/400/600 TA
For support/technical issues contact ADAK directly, or email: adakcom@aol.com. ICUS is not affiliated with ADAK, just a customer.
ADAK COMMUNICATIONS CORPORATION
Corporate Office National Sales Office
5840 Enterprise Drive 4040 N. Calhoun Rd.
Lansing, Michigan 48911 Brookfield, Wisconsin 53005
517-882-5191 414-781-3253
517-882-3194 (FAX) 414-781-8327 (FAX)
ADAK 200 / 400 / 600
ADAK Communications Corporation presents the data series; three ISDN access
products permitting simple, low cost connectivity to all ISDN based data
communications. The ADAK 200, 400 and 600 are NT-1 terminal adapters
that let you take full advantage of synchronous and asynchronous
data transmission using ISDN Basic Rate service. Whether your applications
include Point of Sale, high speed transmission, or the need for multiple
protocol support, the ADAK Data Series provides an unit to suit your data
requirements.
The ADAK Data Series units are compatible with Switched 56 DSUs, PCs,
credit card scanners, and various ISDN terminal adapters, so the units may
be used with existing networks and services. The need for additional devices
such as terminal adapters and NT-1 equipment is eliminated.
The ADAK 200, 400 and 600 support 128 Kbps synchronous and 115 Kbps
asynchronous data speeds for applications such as point of sale and national
network access. In addition to the high data speeds, the ADAK 600 supports
multiple protocols like V.35 and EIA-530/A and utilizes all the data
capabilities of ISDN.
Each Data Series unit allows access to the global X.25 network, offering
cost effective data communications for your applications. The ADAK 200, 400
and 600 support ISDN National-1, National-2, Custom, DMS-100, 5ESS, and
Siemens central office switch software.
[ASCII representation of the picture shown below]
+---------------------------------------------------------------------+
| ADAK 200 |
| ADAK Communications Corporation |
| (517) 887-5800 |
| _______________ ISDN |
| \............./ U-line in|
| \.........../ |
| ----------- Diags O +----+ |
| Port 1 | | |
| ______________ Status O | | |
| \............/ |||||| |
| \........../ Power O +----+ |
| ---------- |
| Port 2 |
+---------------------------------------------------------------------+
+---------------------------------------------------------------------+
| ADAK 400 |
| ADAK Communications Corporation |
| (517) 887-5800 |
| _______________ _______________ ISDN |
| \............./ \............./ U-line in|
| \.........../ \.........../
| ----------- ----------- Diags O +----+ |
| Port 3 Port 1 | | |
| ______________ ______________ Status O | | |
| \............/ \............/ |||||| |
| \........../ \........../ Power O +----+ |
| ---------- ---------- |
| Port 4 Port 2 |
+---------------------------------------------------------------------+
+---------------------------------------------------------------------+
| ADAK 600 ADAK Communications Corporation |
| (517) 887-5800 |
| |
| _______________ _______________ _______________ ISDN |
| \............./ \............./ \............./ U-line|
| \.........../ \.........../ \.........../ in |
| ----------- ----------- ----------- Diags O +----+|
| Port 5 (RS366) Port 3 Port 1 | ||
| ______________ ______________ ______________ Status O | ||
| \............/ \............/ \............/ |||||||
| \........../ \........../ \........../ Power O +----+|
| ---------- ---------- ---------- |
| Port 6 (RS366) Port 4 Port 2 |
+---------------------------------------------------------------------+
ADAK 200 / 400 / 600 SPECIFICATIONS
ISDN Service Options (Basic Rate Interface (BRI))
General Capabilities
--------------------
o Integrated NT-1 functionality
o Integrated terminal adapter functionality
Data Capabilities
-----------------
o X.25 PAD access over the D channel (X.3, X.28, X.29, and T3POS).
o Hayes compatible modem PAD for access to X.25 network.
o Support for point-of-sale applications.
o Reverse charging capability on data calls
ISDN Switch Compatibility
-------------------------
Switch Manufacturer Siemens Northern Telecom AT&T
ISDN Software
National-1 (NI-1) xx xx xx
National-2 (NI-1) xx xx xx
Custom xx xx
Interfaces
----------
Serial Ports
200:
o Two 25 pin serial ports supporting 128 Kbps synchronous and 115 Kbps
asynchronous speeds.
o Support for RS-232 (V.28) and V.25bis/X.21 inband dialing protocols.
400:
o Four 25 pin serial ports supporting 128 Kbps synchronous and 115 Kbps
asynchronous speeds.
o Support for RS-232 (V.28) and V.25bis/X.21 inband dialing protocols.
600:
o Two 25 pin serial ports supporting 128 Kbps synchronous and 115 Kbps
asynchronous speeds.
o Two 25 pin serial ports supporting 128 Kbps synchronous and 115 Kbps
asynchronous speeds. These two ports support the following protocols:
- RS-232 (V.28)
- V.35 (with adapter box)
- EIA-530/A
- RS-422 (V.11, X.27)
- RS-449
- RS-485
- V.25 bis/X.21 Inband dialing
o Two dedicated RS-366 ports
National Service Provider Interface (LEC)
-----------------------------------------
ISDN BRI "U" Reference Point
o One RJ-45 ISDN BRI for the "U" reference point for direct two wire ISDN
access.
Installation and Configuration
------------------------------
o Easily configured through a serial device (PC or terminal).
o Local or remote configuration
LED Status Indicators
---------------------
o Power Status
o Status LED to indicate correct TEI configuration.
o Diagnostic indicator
Operating Environment
---------------------
o Operating temperature: 0 to 50 degrees celsius.
o Storage temperature: -20 to 70 degrees celsius.
o Relative humidity: Up to 95%, non-condensing.
Remote Support and Testing Capabilities
---------------------------------------
o Software can be upgraded via RS-232 or remote D channel software download
o Support for remote configuration
o Extensive remote and local internal diagnostics, including complete testing
of the ISDN line.
Physical Characteristics
------------------------
o Dimensions: 9.5" x 9.3" x 3.1"
o Weight: 3 lbs.
Power Supply
------------
o Integrated with a surge suppressor.
ADAK 200 / 400 / 600 Features
ISDN U Interface Standard
ISDN Power Standard
Two 128 Kbps Sync/115 Kbps Async Standard (200 and 600)
Four 128 Kbps Sync/115 Kbps Async Standard (400)
Two Sync/Async Multi-protocol ports Standard (600)
Two Dedicated RS-366 ports Standard (600)
D Channel X.25 Standard
B Channel Bonding Standard (600)
B Channel X.25 Standard
X.3, X.28, X.29 PAD Standard
T3POS PAD Standard
Hayes AT PAD Standard
Remote Configuration Standard
Remote Software Download Standard
Auto Configuration Standard
SLIP and PPP Access Standard
Modem Optional
G3 Fax Optional
IBM 3270 (bisync) Optional
Custom Protocol PADs Optional
B Channel V.120 Optional
Cut-Line Alarm Detection Optional
Remote Diagnostics Optional
Adapter for High Speed Ports (required) Optional
V.35 Adapter Box Optional
Return to ICUS ISDN Home Page
Return to ICUS Home Page