This chapter provides information on the Cisco 7000 series routers. The information is organized into the following sections:
Product Overview
The Cisco 7000 series of multiprotocol routers combine Cisco Systems' proven
software technology with exceptional reliability, availability,
serviceability, and performance features to meet the requirements of today's
most mission-critical internetworks. The Cisco 7000 series provides
information system professionals with the flexibility they need to meet the
constantly changing requirements at the core and distribution points of the
internetwork. The Cisco 7000 series also provides a clear migration path to
tomorrow's technologies.
The newest member of the Cisco 7000 series, the Cisco 7010, enables the cost-effective deployment of Cisco's high-end routing technology in a compact package. And, as your internetworking requirements grow, you can physically scale up to the Cisco 7000 model, protecting investments in network interface and system processors.
The Cisco 7000 is Cisco's premier high-end platform, supporting more network interfaces and media types than any other Cisco platform. The Cisco 7000 also includes support for dual power supplies.
Network interfaces reside on modular interface processors, which provide a direct connection between the high-speed Cisco Extended Bus (CxBus) and the external network. Distributed processing is accomplished by the Route Processor (RP), Switch Processor (SP), and Silicon Switch Processor (SSP).
The Cisco 7000 runs the Cisco Internetwork Operating System (Cisco IOS), Cisco's industry-leading networking software. Cisco IOS assures robust, reliable internetworks by supporting both LAN and WAN protocols, optimizing WAN services, and controlling internetwork access. In addition, Cisco IOS allows centralized, integrated, and automated installation and management of internetworks.
The Cisco 7000 provides five slots for interface processors; the Cisco 7010 provides three slots for interface processors. Following are the interface processor types:
The reliability, availability, and serviceability features of the Cisco 7000 series include the following:
Allows you to implement dual sources of prime power. Each supply has its own power cord, eliminating the risks associated with failure of uninterruptable power supply systems or building power.
Figure 1: Cisco 7000 Series
Table 18: Cisco 7000 Series Summary of Features
-----------------------------------------------------------------------------
CHARACTERISTIC CISCO 7000 CISCO 7010
=============================================================================
Supported network Ethernet AUI*1* Ethernet AUI
interfaces Fast Ethernet Fast Ethernet
Token Ring Token Ring
FDDI FDDI
HSSI HSSI
Serial Serial
ATM ATM
Multichannel on T1 or Multichannel on T1 or
E1 lines E1 lines
IBM channel IBM channel
-----------------------------------------------------------------------------
Power supplies 2 1
-----------------------------------------------------------------------------
IP slots 5 3
-----------------------------------------------------------------------------
Software features Standard Standard
Bridging Bridging
Packet switching Packet switching
-----------------------------------------------------------------------------
Flash memory (software 4 MB standard 4 MB standard
and microcode upgrades)
-----------------------------------------------------------------------------
Processor type 25-MHz 68040 CPU, 25-MHz 68040 CPU,
16-MB RAM 16-MB RAM
-----------------------------------------------------------------------------
Dimensions (H x W x D) 19.25 x 17.5 x 24.1" 10.5 x 17.5 x 17"
(48.9 x 44.45 x 61.34 cm) (26.67 x 44.45 x 43.18 cm)
-----------------------------------------------------------------------------
Weight (average ~149 lb (~67.6 kg) ~83 lb (~37.65 kg)
shipping) with 5 interface with 3 interface
processors and 2 processors and 1
power supplies power supply
-----------------------------------------------------------------------------
*1* AUI = attachment unit interface.
Table 19: Cisco 7000 Series Environmental Specifications
-----------------------------------------------------------------------------
DESCRIPTION CISCO 7000 CISCO 7010
=============================================================================
AC power supplies 700W (2380 Btu/hour) 600W (2040 Btu/hour)
-----------------------------------------------------------------------------
DC power supplies 1000W input requirement 800W input requirement
700W power output 600W power output
300W (1024 Btu/hr) heat 300W (1024 Btu/hr) heat
dissipation dissipation
20A (-48 VDC) 18A (-40 VDC)
-----------------------------------------------------------------------------
Input 100 to 240 VAC autoranging 100 to 240 VAC autoranging
-----------------------------------------------------------------------------
Frequency 50 to 60 Hz autoranging 50 to 60 Hz autoranging
-----------------------------------------------------------------------------
AC current rating 12A @ 100V; 6A @ 240V 9A @ 100V; 4A @ 240V
-----------------------------------------------------------------------------
Air flow 140 cfm through the Side-to-side through
system blower chassis by variable-speed,
6-fan array
-----------------------------------------------------------------------------
Radiated 62 dBa 47 dBa
acoustic noise
-----------------------------------------------------------------------------
Operating 32 to 104 deg. F 32 to 104 deg. F
temperature (0 to 40 deg. C) (0 to 40 deg. C)
-----------------------------------------------------------------------------
Nonoperating -40 to 185 degrees F -4 to 149 degrees F
temperature range (-40 to 85 degrees C) (-20 to 65 degrees C)
-----------------------------------------------------------------------------
The software product number is SW-G7-10.2.x. The standard router software feature (FR-S7-10.2.X) license is included with the software product. Standard software is included with the system. x indicates a specific software version. Unless you specify otherwise, you will receive the default software version.
Options
Options include processors, interface processors, serial cables, software
features, memory, a second power supply (Cisco 7000 only), and accessories.
If a product number ends with an equal sign (=), the item can be ordered only as a spare. If a product number does not end with an equal sign, the item can be ordered as a spare or as a configurable part of a system order.
Processors
Replacement RPs, SPs, or SSPs can be ordered as spares. The product numbers
are RP=, SP=, and SSP=, respectively.
Interface Processors
Interface processors for the Cisco 7000 series are listed in Table 20.
Table 20: Cisco 7000 Series Interface Processors
----------------------------------------------------------------------------- INTERFACE PROCESSOR PORTS ============================================================================= Ethernet CX-EIP2 2 CX-EIP4 4 CX-EIP6 6Token Ring CX-TRIP2 2 CX-TRIP4 4
FDDI CX-FIP-MM*1* 1 multimode to multimode CX-FIP-SS 1 single-mode to single-mode CX-FIP-MS 1 multimode to single-mode CX-FIP-SM 1 single-mode to multimode
HSSI*2* CX-HIP 1
Serial*3* CX-FSIP4 4 CX-FSIP8 8
ATM CX-AIP-E3 1 E3 coaxial CX-AIP-DS3 1 DS3 coaxial CX-AIP-TM 1 TAXI multimode CX-AIP-SM 1 SONET multimode CX-AIP-SS 1 SONET single-mode
Multichannel*4* CX-MIP-1CT1 1 channelized T1 or ISDN PRI CX-MIP-2CT1 2 channelized T1 or ISDN PRI CX-MIP-1CE1 1 channelized E1 or ISDN PRI CX-MIP-2CE1 2 channelized E1 or ISDN PRI
IBM Channel CX-CIP-PCA1*5* Single parallel (bus and tag) channel interface CX-CIP-PCA2*5* Dual parallel (bus and tag) channel interface CX-CIP-ECA1 Single ESCON*6* channel interface CX-CIP-ECA2 Dual ESCON*6* channel interface CX-CIP-ECAP*5* Single ESCON*6* channel interface and parallel channel interface ----------------------------------------------------------------------------- *1* Includes a mini-DIN-to-DIN transition cable (CAB-FMDD=). *2* HSSI cable required. *3* Serial cables required. *4* MultiChannel cables required. *5* CX-CIP-PCA1, CX-CIP-PCA2, and CX-CIP-ECAP1 ship with a cable that connects the CIP to cable CAB-PCA-VA. Cable CAB-PCA-VA provides the physical connection to the IBM bus and tag cable. Cable CAB-PCA-VA is required and is a standard IBM cable. *6* ESCON = Enterprise Systems Connection.
TRIP
The TRIP provides two or four high-speed (4-Mbps or 16-Mbps) Token Ring
ports. Each port requires a MAU to connect the DB-9 connector to the external
Token Ring networks.
FIP
The FIP provides one high-speed (100-Mbps) FDDI port. Four types of FIPs are
available:
An HSSI cable is required for each HIP. The following table provides a
listing of Cisco 7000 HSSI cables. All cables are 10 feet (3 meters) long.
Table 21: Cisco 7000 Series HSSI Cables
HIP
The HIP provides one HSSI (up to 52-Mbps) port. This port allows you to
choose from a range of connectivity options, including Asynchronous Transfer
Mode (ATM), Switched Multimegabit Data Service (SMDS), Frame Relay, or
private lines -- all at speeds up to DS3 or E3 (45 Mbps and 34 Mbps,
respectively). Only a software configuration is necessary to accommodate
these different network connections.
-----------------------------------------------------
DESCRIPTION PRODUCT NUMBER
=====================================================
HSSI cable, null modem, DTE CAB-HNUL=
HSSI cable, male to male CAB-HSI1=
-----------------------------------------------------
FSIP
The FSIP provides four or eight high-speed serial ports (up to 8 Mbps).
Each FSIP comes with a default dual-port adapter, PA-7KF-SPA, as follows:
For G.703/G.704 support, order optional port adapters PA-7KF-E1/120= or PA-7KF-E1/75=. The G.703/G.704 cables must match the ohm rating for the port adapters. For example, PA-7KF-EI/75, the 75-ohm port adapter, uses the G.703/G.704 75-ohm cable, CAB-E1-BNC.
Except for G.703/G.704 port adapters, the cable connected to the port determines the interface type and mode. The following table lists Cisco 7000 series serial cables supported by the FSIP.
Table 22: Cisco 7000 Series FSIP Cables
--------------------------------------------------------- DESCRIPTION PRODUCT NUMBER ========================================================= X.21 High-density male DTE CAB-X21MT High-density female DCE CAB-X21FCEIA/TIA-449 High-density male DTE CAB-449MT High-density female DCE CAB-449FC
V.35 High-density male DTE CAB-V35MT High-density female DCE CAB-V35FC
EIA/TIA-232 High-density male DTE CAB-232MT High-density female DCE CAB-232FC
EIA-530 High-density mail DTE CAB-530MT
E1 G.703/G.704 E1 twin-axial 120-ohm, balanced 5 m CAB-E1-TWINAX E1 DB-15, 120-ohm, balanced 5 m CAB-E1-DB15 E1 BNC, 75-ohm, balanced 5 m CAB-E1-BNC ---------------------------------------------------------
AIP
The
AIP provides a connection for multiple Cisco routers, creating a
router cluster with advanced switching capabilities. The AIP provides
one ATM interface that supports the following connections:
The ATM cable connects to a Physical Layer Interface Module (PLIM) on the AIP card. The module supplies the interface type and can be ordered as a spare.
Table 23: Cisco 7000 MIP Cables
Each CIP can support up to two IBM mainframe channel connections, which can
be one of the following:
Options for the CIP are listed in Table 24.
Table 24: Cisco 7000 Series CIP Options
MEM-CIP-32M 32-MB memory
MEM-CIP-64M 64-MB memory
CX-ECA1-U*1* Additional ESCON channel adapter for CX-CIP-PCA1 or
CX-CIP-ECA1
CAB-PCA-VA PCA V cable A to connect upstream bus and tag cable to
78-pin, D-shell connector on the CIP Y cable*2*
CAB-PCA-VB PCA V cable B to connect downstream bus and tag cable to
78-pin, D-shell connector on the CIP Y cable*2*
-------------------------------------------------------------------------
*1* Upgrades CX-CIP-PCA1 to CX-CIP-ECAP1 or upgrades CX-CIP-ECA1 to
CX-CIP-ECA2.
*2* The Y cable comes with the CIP card.
MIP
Four models of the
MIP provide a multichannel multiplexer that allows
aggregate multiple channels at Nx64 and/or Nx56 on the same 1.5-Mbps T1
or 2-Mbps E1 line. Models CX-MIP-1CT1 and CX-MIP-2CT1 provide one or two
T1 ports, and models CX-MIP-1CE1 and CX-MIP-2CE1 provide one or two E1
ports. Two serial cables, null-modem and straight-through, are used with
the MIP. See the following table for cable product numbers.
--------------------------------------------------
DESCRIPTION PRODUCT NUMBER
==================================================
DSX1 to CSU DB-15 CAB-7KCT1DB15
DSX1 to CSU DB-15 null CAB-7KCT1NULL
--------------------------------------------------
When used with Cisco IOS dial-on-demand
routing software, the MIP can operate
as a single- or dual-port ISDN PRI device. A dual-port MIP card can be
configured to allow one port to operate as an ISDN PRI while the other
performs a multichannel multiplexer role.
CIP
The
CIP provides a connection to IBM or IBM-compatible mainframes. It
supports both IBM mainframe cabling standards: parallel channel (also called
bus and tag) and ESCON architecture. The host Cisco 7000 series router must
be running Cisco IOS Release 10.2 or higher.
-------------------------------------------------------------------------
DESCRIPTION PRODUCT NUMBER
=========================================================================
MEM-CIP-8M 8-MB memory
Dual Power Supplies
The optional additional power supply system provides dual load-sharing for protection against system interruption in the event that one power supply system or one source of power fails. When ordered with the system, the part number is PWR-7000/2 for the redundant AC power supply. For a DC power supply, use product numbers PWR-7000-CD or PWR-7000/2-DC. Note that DC power supplies do not include a power cord.
When you order an AC power supply as a spare, choose the appropriate product numbers to specify the type of power cord to be included in the order. See the following table for the spare power supply product numbers.
Table 25: Cisco 7000 Spare AC Power Supply Product Numbers
----------------------------------------------------------
COUNTRY PRODUCT NUMBER
==========================================================
Cisco 7000 Australia PWR-7000-ACA=
Europe PWR-7000-ACE=
Italy PWR-7000-ACI=
United Kingdom PWR-7000-ACU=
USA PWR-7000-AC=
Cisco 7010 Australia PWR-7010-ACA=
Europe PWR-7010-ACE=
Italy PWR-7010-ACI=
United Kingdom PWR-7010-ACU=
USA PWR-7010-AC=
----------------------------------------------------------
The following nomenclature applies:
Table 26: Cisco 7000 Series Software Options
-----------------------------------------------------------------------------
PRODUCT NUMBERS PRODUCT NUMBERS PRODUCT NUMBERS
SOFTWARE CISCO IOS CISCO IOS
DESCRIPTION RELEASE 9.1 RELEASE 10.0 RELEASE 10.2
=============================================================================
Router software SW-G7-9.17.x SW-G7-10.0.x SW-G7-10.2.x
SW-G7-9.17.x= SW-G7-10.0.x= SW-G7-10.2.x=
Feature: standard FR-S7-9.17.x FR-S7-10.0.x FR-S7-10.2.x
FR-S7-9.17.x= FR-S7-10.0.x= FR-S7-10.2.x=
Feature: bridging FR-B7-9.17.x FR-B7-10.0.x= FR-B7-10.2.x=
Feature: packet FR-X7-9.17.x FR-X7-10.0.x= FR-X7-10.2.x=
switching*1*
-----------------------------------------------------------------------------
*1* Includes the DDN X.25 option for use in the Defense Data Network (DDN)
environment.
Table 27: Cisco IOS Release 10.3 Software Features for the Cisco 7000
Series
-----------------------------------------------------------------------------
CATEGORY PROTOCOLS/FEATURES FEATURE LICENSE
=============================================================================
LAN support IP, LAN extension host software, Novell Standard
IPX, AppleTalk I and II, DECnet IV and V,
OSI, XNS, Banyan VINES, Apollo Domain
--------------------------------------------------------------
Transparent and translational bridging, Bridging option
multiring
-----------------------------------------------------------------------------
WAN services HDLC, PPP*1*, ISDN*2*, IPXWAN 2.0 Standard
--------------------------------------------------------------
X.25, Frame Relay, SMDS Packet-switching
option
-----------------------------------------------------------------------------
WAN Header and link compression, dial-on-demand, Standard
optimization dial backup, bandwidth-on-demand, custom
and priority queuing, access lists, access
security, snapshot routing
-----------------------------------------------------------------------------
IP routing RIP, IGRP, Enhanced IGRP, OSPF, BGP, EGP, Standard
ES-IS, IS-IS, PIM, NHRP
-----------------------------------------------------------------------------
Other IPX RIP, NLSP, RTMP, AURP, SRTP Standard
routing
-----------------------------------------------------------------------------
IBM support SRB/RSRB, SRT, DLSw+*3*, SNA and NetBIOS Bridging
WAN optimization via local acknowledgment,
caching and filtering, SDLC Integration,
SDLC-to-LAN conversion (SDLLC), SDLC
transport (STUN), TG/COS, Downstream PU
concentration (DSPU)
--------------------------------------------------------------
QLLC and Frame Relay SNA support (RFC 1490) Bridging and
packet-switching
options
-----------------------------------------------------------------------------
Management AutoInstall, SNMP, Telnet Standard
-----------------------------------------------------------------------------
*1* PPP includes support for LAN protocols, PAP and CHAP authentication and
PPP compression.
*2* ISDN support includes calling line identification (ANI), X.25 over the B
channel, ISDN subaddressing, and applicable WAN optimization features.
*3* DLSw+ will first be supported in Cisco IOS 10.3(2).
Table 28: Cisco 7000 Series Accessories
-----------------------------------------------------------------------------
7000 PRODUCT 7010 PRODUCT
PRODUCT NUMBER NUMBER DESCRIPTION
=============================================================================
Rack-mount ACS-7000RMK= ACS-7010RMK= Standard EIA 19-inch rack-
kit mount kit
Cable -- ACS-7010CBLM= Cable management system
management
system
LED board MAS-7000LED= -- The LED board provides
system status indications
Spare PKG-7000= PKG-7010= Spare packaging material
packaging
Arbiter MAS-7000ARB= MAS-7000ARB= The arbiter controls CxBus
traffic
Fan assembly MAS-7000FAN= MAS-7010FAN= Fan or blower assembly
Air filter ACS-7000FILTER= -- Air filter for fan assembly
Blank carrier MAS-7000BLANK= MAS-7000BLANK= The blank carrier, which
fills an empty chassis
slot, is designed to
optimize airflow through
the chassis and minimize
electromagnetic
interference (EMI)
emissions. Slots not filled
with interface processors
will be filled with blank
carriers at the factory.
-----------------------------------------------------------------------------
Refer to the section "Cisco 7000 Series Configuration Worksheet Considerations" for additional information on filling out the worksheet.
No power budgeting is required because all configurations of interface cards are supported by the Cisco 7000.
There is no slot prioritization in the Cisco 7000. Card slots will be filled from slot 0 to slot 4 in the factory in the following order:
Slots not filled with interface processors will be filled with blank card carriers.
Following are the serial cables for each interface listed:
--------------------------------------------
INTERFACE SERIAL CABLE
============================================
X.21 CAB-X21MT (male DTE)
CAB-X21FC (female DCE)
EIA/TIA-449 CAB-449MT (male DTE)
CAB-449FC (female DCE)
V.35 CAB-V35MT (male DTE)
CAB-V35FC (female DCE)
EIA/TIA-232 CAB-232MT (male DTE)
CAB-232FC (female DCE)
EIA-530 CAB-530MT (male DTE)
T1 CAB-7KCT1DB15
CAB-7KCT1NULL
G.703/G.704 CAB-E1-TWINAX
CAB-E1-DB15
CAB-E1-BNC
--------------------------------------------
Chassis: Cisco 7000 chassis or Cisco 7010 chassis (one
mandatory)
Route Processor: RP or RP-64MB (one mandatory)
Switch Processor: SP or SSP (one mandatory)
Standard power supply: Mandatory (AC or DC). If DC, specify PWR-7000-DC
Redundant power supply: Optional for Cisco 7000 chassis only: PWR-7000/2 for
AC supply and PWR-7000/2DC
Rack mounting hardware: Standard
Power cord: U.S. (CAB-7KAC) -- standard if not specified
Australia (CAB-7KACA)
Europe (CAB-7KACE)
Italy (CAB-7KACI)
U.K. (CAB-7KACU)
Software: Default software (current level)
Other version______________
Additional licenses: Bridging
Packet switching
Cable management kit: Standard (for Cisco 7000 only)
Interface Processors and Port Adapters
-----------------------------------------------------------------------------
INTERFACE PROCESSORS PRODUCT |SLOT|SLOT|SLOT|SLOT|SLOT
(Maximum of One Per Slot) NUMBER | 0 | 1 | 2 | 3* | 4*
=============================================================================
EIP Ethernet Interface CX-EIP2 | | | | |
Processor, 2-port | | | | |
----------------------------------------------------+----+----+----+----+----
Ethernet Interface CX-EIP4 | | | | |
Processor, 4-port | | | | |
----------------------------------------------------+----+----+----+----+----
Ethernet Interface CX-EIP6 | | | | |
Processor, 6-port | | | | |
----------------------------------------------------+----+----+----+----+----
TRIP Token Ring Interface CX-TRIP2 | | | | |
Processor, 2-port | | | | |
----------------------------------------------------+----+----+----+----+----
Token Ring Interface CX-TRIP4 | | | | |
Processor, 4-port | | | | |
----------------------------------------------------+----+----+----+----+----
FIP FDDI Interface Processor, CX-FIP-MM | | | | |
multimode to multimode | | | | |
----------------------------------------------------+----+----+----+----+----
FDDI Interface Processor, CX-FIP-SS | | | | |
single-mode to single-mode | | | | |
----------------------------------------------------+----+----+----+----+----
FDDI Interface Processor, CX-FIP-MS | | | | |
multimode to single-mode | | | | |
----------------------------------------------------+----+----+----+----+----
FDDI Interface Processor, CX-FIP-SM | | | | |
single-mode to multimode | | | | |
----------------------------------------------------+----+----+----+----+----
HIP HSSI Interface Processor, CX-HIP | | | | |
1 high-speed serial port | | | | |
----------------------------------------------------+----+----+----+----+----
AIP ATM Interface Processor, CX-AIP-TM | | | | |
TAXI multimode, 100 Mbps | | | | |
----------------------------------------------------+----+----+----+----+----
ATM Interface Processor, CX-AIP-SM | | | | |
SONET/SDH multimode, 155 | | | | |
Mbps | | | | |
----------------------------------------------------+----+----+----+----+----
ATM Interface Processor, CX-AIP-SS | | | | |
SONET/SDH single-mode, | | | | |
155 Mbps | | | | |
----------------------------------------------------+----+----+----+----+----
ATM Interface Processor, CX-AIP-E3 | | | | |
E3 coaxial, 34 Mbps | | | | |
----------------------------------------------------+----+----+----+----+----
ATM Interface Processor, CX-AIP-DS3 | | | | |
DS3 coaxial, 45 Mbps | | | | |
----------------------------------------------------+----+----+----+----+----
MIP MultiChannel Interface CX-MIP-1CT1 | | | | |
Processor, 1-port T1 | | | | |
----------------------------------------------------+----+----+----+----+----
MultiChannel Interface CX-MIP-2CT1 | | | | |
Processor, 2-port T1 | | | | |
----------------------------------------------------+----+----+----+----+----
MultiChannel Interface CX-MIP-1CE1 | | | | |
Processor, 1-port E1 | | | | |
----------------------------------------------------+----+----+----+----+----
MultiChannel Interface CX-MIP-2CE1 | | | | |
Processor, 2-port E1 | | | | |
----------------------------------------------------+----+----+----+----+----
FSIP Fast Serial Interface CX-FSIP4 | | | | |
Processor, 4-port | | | | |
----------------------------------------------------+----+----+----+----+----
FSIP dual-port adapter PA-7KF-SPA= | | | | |
(PA), default is 2 Quantity____ | | | | |
----------------------------------------------------+----+----+----+----+----
FSIP E1-G.703/G.704 PA-7KF-E1/120= | | | | |
120-ohm dual PA Quantity____ | | | | |
----------------------------------------------------+----+----+----+----+----
FSIP E1-G.703/G.704 PA-7KF-E1/75= | | | | |
75-ohm dual PA Quantity____ | | | | |
----------------------------------------------------+----+----+----+----+----
FSIP Fast Serial Interface CX-FSIP8 | | | | |
Processor, 8-port | | | | |
----------------------------------------------------+----+----+----+----+----
FSIP dual-port adapter A-7KF-SPA= | | | | |
(PA), default is 4 Quantity____ | | | | |
----------------------------------------------------+----+----+----+----+----
FSIP E1-G.703/G.704 PA-7KF-E1/120= | | | | |
120-ohm dual PA Quantity____ | | | | |
----------------------------------------------------+----+----+----+----+----
FSIP E1-G.703/G.704 PA-7KF-E1/75= | | | | |
75-ohm dual PA Quantity____ | | | | |
----------------------------------------------------+----+----+----+----+----
CIP Channel Interface CX-CIP-PCA1 | | | | |
Processor with single | | | | |
parallel channel | | | | |
----------------------------------------------------+----+----+----+----+----
Channel Interface CX-CIP-PCA2 | | | | |
Processor with dual | | | | |
parallel channel | | | | |
----------------------------------------------------+----+----+----+----+----
Channel Interface CX-CIP-ECA1 | | | | |
Processor with single | | | | |
ESCON channel | | | | |
----------------------------------------------------+----+----+----+----+----
Channel Interface CX-CIP-ECA2 | | | | |
Processor with dual | | | | |
ESCON channel | | | | |
----------------------------------------------------+----+----+----+----+----
Channel Interface CX-CIP-ECAP1 | | | | |
Processor with single | | | | |
ESCON and single parallel | | | | |
channel | | | | |
-----------------------------------------------------------------------------
* Items apply to the Cisco 7000 only, and cannot be used in the Cisco 7010.
Cables
-----------------------------------------------------------------------------
INTERFACE DESCRIPTION PRODUCT NUMBER QUANTITY
=============================================================================
HIP HSSI, null modem, DTE CAB-HNUL
-----------------------------------------------------------------------------
HSSI, male-to-male CAB-HSI1
-----------------------------------------------------------------------------
MIP DSX1 to CSU BD-15 thru CAB-7KCT1DB15
-----------------------------------------------------------------------------
DSX1 to CSU BD-15 null CAB-7KCT1NULL
-----------------------------------------------------------------------------
FSIP X.21 high-density male DTE CAB-X21MT
-----------------------------------------------------------------------------
X.21 high-density female DCE CAB-X21FC
-----------------------------------------------------------------------------
EIA/TIA-449 high-density male DTE CAB-449MT
-----------------------------------------------------------------------------
EIA/TIA-449 high-density female DCE CAB-449FC
-----------------------------------------------------------------------------
V.35 high-density male DTE CAB-V35MT
-----------------------------------------------------------------------------
V.35 high-density female DCE CAB-V35FC
-----------------------------------------------------------------------------
EIA/TIA-232 high-density male DTE CAB-232MT
-----------------------------------------------------------------------------
EIA/TIA-232 high-density female DCE CAB-232FC
-----------------------------------------------------------------------------
EIA-530 high-density male DTE CAB-530MT
-----------------------------------------------------------------------------
E1-G.703/G.704 TWINAX 120-ohm, CAB-EI-TWINAX
balanced 5 m
-----------------------------------------------------------------------------
E1-G.703/G.704 DB-15 120-ohm, CAB-EI-DB15
balanced 5 m
-----------------------------------------------------------------------------
E1-G.703/G.704 BNC 75-ohm, CAB-EI-BNC
balanced 5 m
-----------------------------------------------------------------------------
CIP Upstream parallel channel interface CAB-PCA-VA
for CX-CIP-PCA1, CX-CIP-PCA2,
CX-CIP-ECAP1*
-----------------------------------------------------------------------------
Downstream parallel channel interface CAB-PCA-VB
for CX-CIP-PCA1, CX-CIP-PCA2,
CX-CIP-ECAP1*
-----------------------------------------------------------------------------
* Bus and tag cables and ESCON cables can be ordered from IBM.